Casablanca Fan Company 69xxD Outdoor Ceiling Fan User Manual


  Open as PDF
of 10
 
9
COLLAR
SWITCH
HOUSING
3-SPEED ♦ OPTIONAL LIGHT FIXTURE INSTALLATION
3-SPEED ♦ OPERATION
Pull-chain switches on the fan control the fan and lights.
Usingthefancontrolpull-chainswitch:Fanoffatstart.
First pull: fan ON, low speed
Second pull: medium speed
Third pull: high speed
Fourth pull: fan OFF
Usingtheoptionallightpull-chainswitch:Lightoffat
start.
First pull: light ON
Second pull: light OFF
Directionofbladerotationiscontrolledbythereverseslide
switch on the side of the switch housing.
No changes in household wiring are required.
1. Refer to light kit instructions to assemble and attach your light
kit correctly.
2.Removethetwo8-32screwsfromtheswitchhousingcap.
3.Removetheplugfromswitchhousing.
4.Installpull-chainswitchandngertightencollaronswitch.
5.Connectonewirefrompull-chainswitchtotheBLUED1-Option
wire. Secure splice with a wire nut.
6.Connectotherwirefrompull-chainswitchtoBLACKwirefromlight
kit. Secure splice with a wire nut.
7. Connect WHITE wire from switch housing to WHITE wire from light
kit. Secure splice with a wire nut.
8.Atthecanopy,connecttheBLACKandBLUEwires.
3-SPEED ♦ OPTIONAL WALL CONTROL ♦ W-40
TheW-40wallcontrolprovidesfour-speedcontroloffanfromaconvenientwalllocation.
TheW-40isdesignedtoreplaceastandardwallswitchandwilltwallboxeswithadepth
of 2” or greater. Not for use with single pull-chain fan/light option wiring.
ToinstallaW-40wallcontrolinplaceofanexistingwallswitch,followtheinstructions
ontheW-40package.
Note:Norewiringisrequiredifthefanisreplacinganexistinglightxture.
Operation of the fan from the wall switch is simple:
1. Turn knob to obtain desired speed setting.
R
3-SPEED ♦ OPTIONAL WALL CONTROL ♦ W-80
TheW-80wallcontrolprovidesseparatecontroloffanandlightwithtwoseparateknobs
fromaconvenientwalllocation.TheW-80isdesignedtoreplaceastandardwallswitch
andwallboxeswithadepthof2”orgreater.Requirestwohotleadsfromwallboxtoceil-
ingwiringbox.
ToinstallaW-80wallcontrolinplaceofanexistingwallswitch,followtheinstructions
ontheW-80package.
Operation of the fan from the wall switch is simple:
1. Turn the upper knob to the desired fan speed.
2. Turn the lower knob to the desired light setting.
OFF
LO
MED
MED
HI
HI
OFF
MAX
CAUTION! Failure to set the pull-chain speed to HIGH can result in faulty operation of
the fan and damage to the W-40 wall control. To confirm fan is set to HIGH: Turn W-40
fan speed switch to ‘HI’ - set fastest fan speed with pull chain.
CAUTION! Failure to set the pull-chain speed to HIGH can result in faulty operation of
the fan and damage to the W-80 wall control. To confirm fan is set to HIGH: Turn W-80
fan speed switch to ‘HI’ - set fastest fan speed with pull chain.
NOTE: If a separate circuit is used to control the lights from a wall
control, the BLUE D1-Option wire in the canopy should be connected
to that switch leg with the BLACK fan power wire.
3- Speed
REVERSE
SWITCH
OPTIONAL LIGHT
PULL CHAIN
SWITCH
FAN & SPEED CON-
TROL
PULL CHAIN SWITCH
 previous