Casablanca Fan Company 69xxD Outdoor Ceiling Fan User Manual


  Open as PDF
of 10
 
10
TROUBLESHOOTING
Before Requesting Service: Please follow this troubleshooting guide before contacting your dealer for assistance.
Caring for Finishes: For cleaning, a soft brush or lint-free cloth
shouldbeusedtopreventscratchingthenish.Avacuumcleaner
brushnozzlecanremoveheavierdust.Surfacesmudgesoranac-
cumulationofdirtanddustcaneasilyberemovedbyusingamild
detergent and slightly dampened soft cloth. An antistatic agent
may be used, but neveruseabrasivecleaningagents.Thesewill
damage the finish. Painted and high-gloss blades may be cleaned
in the same manner.
Blades: Wood finish blades should be cleaned with a furniture
polishing cloth. Occasionally, a light coat of furniture polish may
be applied for added protection and beauty.
Never Lubricate this Fan!
The precision motor at the heart of your Casablanca fan features
sealed bearings that are lubricated for life. Do not attempt to oil
the motor.
Changing Light Bulbs
Be sure to turn power to the fan OFF at the wall switch or circuit
breaker before changing light bulbs. Replace bulbs with same type
asremovedfromthexture.Eachfanisratedfora maximumTOTAL
wattage of lighting.
Exceedingtheratedmaximumallowablewattageforthefanwill
burnoutthefanelectronicsmoduleandvoidthewarranty.
PROBLEM
POSSIBLE REMEDIES
FAN WILL NOT START Check main circuit fuses, circuit breakers, or wall switch position.
Check all wire connections, making sure the power is turned off during this inspection.
Checkthatreverseswitchisnotsetincenterofthrow.
FAN WOBBLES OR SHAKES Be sure canopy pin is properly set into the slot on the ball.
EXCESSIVELY Checkthescrewsholdingthebladeholderstotheywheel(ordirectdrivemotor).Tightenasnecessary.
Checkthatbladeholdershavenotbeenbentduringinstallation.
FAN NOISY DURING Checkandtightenlightxtureretainingscrews,glassshadescrewsand/orthelightbulb(s)asneccessary.
OPERATION Tighten the blade to bladeholder screws.
Tighten canopy screws and mounting plate assembly.
Checkandtightenbladeholderstoywheel(ordirectdrivemotor).
Makesureallscrewsinthemotorhousingaresnug,butnotoverlytight.
Checkthatthewirenutsinsidethecanopyandswitchhousingarenottouchingthemetalpartsorhave
fallen off the wire splices. Tighten or adjust as necessary.
BREAK-IN PERIOD Letfanrunathighspeedfortwo(2)hours
DOES NOT RUN ON Ifnew,“break-in”mayberequired-runathigherspeedforseveraldays
LOW SPEED
PROBLEM POSSIBLE REMEDIES..
3-SPEED
FAN RUNS SLOWLY IN EITHER DIRECTION IF ROTATION IS STARTED BY HAND; WILL NOT REVERSE: Defective reverse switch; defective
capacitor; or open motor winding: Replace reverse switch assembly; replace PCB assembly; or replace motor unit.
FAN WILL NOT OPERATE AT PROPER SPEEDS OR WILL NOT OPERATE AT ANY SPEED: Defective three-speed pull-chain switch assembly; or
defective capacitor: Replace three-speed pull-chain switch assembly; or replace PCB assembly.
For questions or to locate the nearest Casablanca Authorized Service Center
call toll free: 1-888-227-2178
or visit us on the web at: www.casablancafanco.com
Product SPecificationS
Model Name: New Orleans Centennial
®
Model Number: 69xxD
Dimensions: A = 26"
B = 28"
C = 3"
D = 13"
E = 5.6"
Weight: 36 lbs.
Motor: XLP 2000
™
Blade Span: 46" or 54”
Blade Iron Pitch: 15°
No. of Blades: 5
Technology: 3-Speed
Airow*: 6,005 cfm
Electricity Use*: 108 watts
Airow Efciency*: 58.1 cfm/watt
* Performance data is for fan only. No lighting wattage is
included. Measurements taken with 21” basic blades.
NOTE: Dimension B
includes light fixture
and glass.
 previous