Filter
Top Products
TRIGGER SAFETY LATCH
In the engaged position, the trigger safety latch prevents the
gun from being triggered accidentally. Push the latch fully down
to engage it (See Figure 10 and 11).
Always engage the trigger safety latch when the unit is not in
use.
4. Brass Swivel Adaptor (See Figure 4). If it’s not already
attached to the pump inlet, assemble the brass swivel adapter
and attach it to the pump inlet (See Figure 6 and Figure 7). Be
sure to connect the correct side of the brass swivel adapter to
the pump.
5. Secure garden hose (not included) to the inlet connection
on pump.
6. Connect the high pressure hose to the pump outlet (See Figures
4 and 8).
7. Attach the lance with nozzle to the gun (see Figure 9).
Figure 10 - Trigger locked
Engaged
Disengaged
Pre-Operation (Continued)
www.chpower.com
Figure 9 – Attach lance to gun
Pressure Washers
Figure 5 – Attach suction tube to barb
fitting
Figure 6 - Brass swivel adapter
Connect this end to garden hose
Connect this end to pump
Washer
Washer
with filter
screen
Figure 7 - Connect the brass swivel to
the pump
Brass swivel adapter
Pump inlet
Figure 8 – Connect high pressure hose
to pump
Figure 11 - Trigger unlocked
5