Filter
Top Products
Pressure Washers
15
1 Injector Lance PM268500AV 1
2 Lance Tank PM268012AV 1
3 O-ring MJ106515AV 1
4 Suction Tube PM268405AV 1
5 Inner Cap PM268302AV 1
6 Outer Cap PM268312AV 1
7 Screw MJ106100AV 1
8 O-ring MJ106511AV 3
9 Connector Tube PM268450AV 1
10 Check Valve Kit PM342400SV 1
11 Suction tube weight PM342405AV 1
12 Clip PM342410AV 1
12
11
1
2
3
4
5
6
9
10
7
8
Replacement Parts List — High Pressure Soap Lance
Ref
Description
Product
Qty
No. Number
High Pressure Soap Lance
1. Make sure pressure washer is running.
2. Rotate indicator on cap to the “On” position to apply
soap (Figure 4).
3. Pull back on black nozzle to ensure lance is in high
pressure mode (Figure 5).
High Pressure Operation
Figure 4
4. Twist nozzle cover to adjust spray pattern from jet to
wide fan spray (Figure 6).
5. Before rinsing, move indicator on cap to "OFF" position
to shut off soap (Figure 7).
6. Water-to-soap ratio: 12 to 1
Figure 5
Figure 6
Figure 7
www.chpower.com
For Replacement Parts, Call 1-800-330-0712
Please provide following information:
- Model number
- Serial number (if any)
- Part description and number as shown in parts list
Address parts correspondence to:
Campbell Hausfeld
Attn: Customer Service
100 Production Drive
Harrison, Ohio 45030