Cal Spas LTR20111058 Hot Tub User Manual


 
2011 Genesis Portable Spa
LTR20111058, Rev. B
Cleaning and Maintenance
www.calspas.com
24
Cleaning the Cover
Vinyl and Leather Cleaner
Because the cover is constantly exposed to weather, you should protect it as part of your
monthly maintenance plan. Cal Spas Vinyl and Leather Cleaner is specically designed to
protect spa covers from chemical and ultraviolet light damage. It accomplishes this without
leaving an oily residue behind that is normally associated with common automotive vinyl pro-
tectants. Cal Spas Vinyl and Leather Cleaner should be used sparingly. Incorrect usage may
cause water clarity issues.
Periodic Maintenance
Remove spa cover from spa.1.
Allow spa cover to dry completely.2.
Spray Vinyl and Leather Cleaner to cover evenly and wipe dry.3.
Allow spa cover to dry completely.4.
Reinstall cover on spa.5.
Warning: Do not use automotive vinyl protectants on spa covers. These products are generally oil-based
and will cause severe water clarity issues that are difcult to correct.
Cleaning and Replacing the Filter
Filtration is one of the most important steps you can take to ensure clean, clear water. It is far less expensive
to x water clarity problems by ltering your spa than by using excessive amounts of chemicals, excessive
ltration times, or by water replacement.
In addition, you need to regularly clean out the lter basket mounted on top of the lter well.
See the section “Clear Water Plan” on page 14 for more information on cleaning your lter.
Covering Your Spa
Important! Keep the spa covered when not in use!
Covered spas will use less electricity in maintaining your set temperature.
Covering your spa will protect your spa’s nish from the sun’s ultraviolet rays.
You are required to keep the spa covered to maintain warranty coverage.
Covering your spa helps prevent children from drowning in the spa.
See the manual enclosed with your cover for instructions on mounting the locks and how to lock and unlock
the cover.
In addition, while the spa cover is rigid, it is not designed to support any weight. Therefore, as a safety
precaution and to preserve the life of your cover, you must not sit, stand, or lie on it, nor should you place
objects of any kind on top of it.