Filter
Top Products
OPERATION
RMB 1445 11/10 Operation Section 4-21
© 2010 Alamo Group Inc.
OPERATION
8. ROTOR CONTROLS
Reversing Rotation - With Flailhead
Select “ROTOR OFF”
Wait until the rotor has stopped turning.
Turn the small lever on the side of the rotor control lever pivot box 180 degrees. This will reset the control lever
stop inside the pivot box and allow opposite rotation to be selected.
Reversing Rotation - With Sicklebar
Always pull the lever towards the operator to start cutterbar operation.
Never reverse cutting direction.