Filter
Top Products
MAINTENANCE
RMB 1445 11/10 Maintenance Section 5-4
© 2010 Alamo Group Inc.
MAINTENANCE
CUTTING PTO SHAFT
Separate the two PTO half shafts from one another.
1. Loosen the three screws on driveline shield.
2. Remove the three screws for each shaft half.
3. Separate the shafts from the shields.
Always disconnect the main PTO Driveline from the Tractor before performing service on
the Implement. Never work on the Implement with the tractor PTO driveline connected and
running. Rotating Parts, Blades or Drivelines could turn without warning and cause
immediate entanglement, injury or death.
(S3PT-11)