Filter
Top Products
ASSEMBLY
RMB 1445 11/10 Assembly Section 3-9
© 2010 Alamo Group Inc.
ASSEMBLY
FINAL ASSEMBLY CHECKS
1. With the arms at half reach and with the flail head clear of the ground carry out final adjustment of the lift
arm levelling box to bring the main frame horizontal.
2. Tighten check chains and/or stabilizer bars.
3. Carefully operate the machine through its full range of movements while checking that hoses are not under
tension, pinched, frayed, or kinked and that all movements are functioning correctly.
4. Fold the machine into the transport position. The machine is now ready to proceed to the work site.
OIL REQUIREMENTS
Tank
The machine is delivered from the factory without oil. Fill the reservoir with a light hydraulic oil as
recommended in the chart until the oil level is approximately 3” below the top of the tank. The total capacity is
approximately 65 liters (17 gallons). Do not overfill. The oil must have anti-frothing characteristics suitable for
use in hydraulic systems.
Supplier Cold or Temperature Climate Hot Climate
Castrol Agricastrol hydraulic oil
Hy-spin AWS46
Hy-spin AWS68
Shell Tellus 46 Tellus 68
Mobil D.T.E. 25 D.T.E. 26
Esso Nuto “H” or “A” 46 Nuto “H” or “A” 68
Texaco Rando HD 46 Rando HD 68
Gulf Hydrasil 46 Hydrasil 68
B.P. Energal HLP 46 Energal HLP 68
Dalton Silkolene Dove 46 or
Derwnet 46
Silkolene Dove 68
Elf Hydrelf 46 Hydrelf 68
ISO VG 46 68
SAE 10W 20