Filter
Top Products
OPERATION
PT5 09/10 Operation Section 4-15
© 2010 Alamo Group Inc.
OPERATION
SICKLE BAR INSPECTION
• Inspect blade and bolts for looseness and
excessive wear. Make sure the unit is
securely blocked up when crawling
underneath or set on ground before doing
maintenance. Replace damaged and worn
blade to keep unit operating properly.
• Ensure hydraulic cylinder is installed and
retained correctly. Ensure the proper size
pins are used to retain the cylinder in place
and are secured with pins.
• Ensure hydraulic lines are properly connected
to the hydraulic valve and cylinder. Check for
hydraulic leaks along hoses and fittings. DO
NOT use your hands to check for oil leaks.
Use a piece of heavy paper or cardboard to
check for hydraulic oil leaks.
• Inspect the condition of the skid shoe and
hardware. OPS-B-0060
Never attempt to lubricate, adjust, or remove material from the Implement while it is in
motion or while tractor engine is running.
(SG-20)
HYDRAULIC LINE INSPECTION
• Check for hydraulic leaks along hoses,
cylinders and fittings. IMPORTANT: DO NOT
use your hands to check for oil leaks. Use a
piece of heavy paper or cardboard to check for
hydraulic oil leaks.
• Inspect the condition of the valve.
• Ensure fittings are properly connected.
OPS-B- 0023_G
Attention: Oil Filler Cap is also the Pressure Relief Cap.
Remove cap slowly to relieve pressure before removing cap completely. Stay clear to
prevent being scalded with hot oil that may spray out of the tank that is still pressurized and
may cause serious injury to eyes, face, and exposed skin.
(Ops-0001-MISC)