Filter
Top Products
1
The Home Security Motion Activated Lighting
System is designed to turn on automatically at
night when a person enters the detection
zone. The light will stay on as long as the
motion detector senses motion in the zone.
The light will turn off in approximately 90 sec-
onds after the person leaves the detection
zone or stops moving.
During the day, the solar panel converts sun-
light into electricity and recharges the battery
in the main housing. At night, the light turns
on automatically when it detects motion using
the electricity stored during that day.
The number of activations per night are
dependent on your geographical location,
weather conditions and seasonal lighting
availability.
NOTE: Solar security lights do not receive as
much direct sunlight in winter
months. Therefore, the number of
activations per night will be reduced
during winter.
HOW YOUR HOME SECURITY MOTION
ACTIVATED LIGHTING SYSTEM WORKS
IMPORTANT: BEFORE FIRST USE
After installing the main housing and solar
panel module, leave the switch in the
“OFF” position and charge in full, direct
sunlight for THREE FULL DAYS. Then
remove the switch label and slide the switch
to the “AUTO” position. The light will turn
on automatically at night when it detects
motion.
Solar Panel
Detection Zone
cut along dotted line
TEMPLATE
Screw Hole
Screw Hole
INSTR-SM SL-7.q 4/22/02 11:29 AM Page 2