Filter
Top Products
Tube Installation
8
LOWER TUBE INSTALLATION
1. Lift discharge deflector up (D, Figure 8).
2. Insert lower chute rod (A) into mounting plate (B).
3. Pull rubber strap (C) and secure by placing hole
closest to knob in strap completely over locknut (E).
CONNECTING UPPER AND MIDDLE TUBE
1. Slide the upper tube (A, Figure 9) into cover (B) align-
ing ridge (C) with cutout (D).
2. See Figure 10 for correct hole location and secure
the upper tube (E) to middle tube using screw (F).
3. Slide middle tube (D) into upper tube (E).
4. Slide middle tube (D) over boot (A). Pull strap (B)
and place hole completely over pin (C).
C
A
B
C
D
A
B
E
D
Figure 9. Install Upper Tube to Cover
A. Upper Tube
B. Cover
C. Ridge, Upper Tube
D. Ridge Cutout
Figure 10. Install Middle Tube
A. Lower Chute
B. Strap, Rubber
C. Pin
D. Middle Tube
E. Upper Tube
F. Screw, 1/4 x 3/4
44” Frame Hung Mowers
50” Frame Hung Mowers
44” Free Floating Mowers
50” Free Floating Mowers
50” ZT3000 Mowers
44” ZT3000 Mowers
F
C
D
E
A
B
Figure 8. Install Lower Tube
A. Lower Chute Rod
B. Mounting Plate
C. Rubber Strap
D. Discharge Deflector
E. Locknut
F. Bolt Carriage 1.25