Filter
Top Products
ASSEMBLY
TW120 01/11 Assembly Section 3-11
© 2011 Alamo Group Inc.
ASSEMBLY
Rear Deflector
Attach the rear rubber Deflectors (1) to the Cutter with bracket Straps (2), 1/2” x 1-1/4” Bolts (3), Flatwashers
(4) and Locknuts (5)
.
CHAIN GUARD (EXTRA EQUIPMENT)
CHAIN GUARDS: Front and Rear Chain Guards (Optional Equipment) are recommended for higher than
normal usage (100 hours or more per year) and will provide protection from thrown objects with careful
operation. Chain Guards must be maintained in good repair by replacing missing or worn sections or by being
replaced when seriously worn or damaged.
Front Chain Guards
Attach the right and left Chain Guard assemblies (1)
to the Cutter with 1/2” x 1-1/4” Bolts (2),
Flatwashers (3), and Locknuts(4).