Filter
Top Products
ASSEMBLY
TW120 01/11 Assembly Section 3-4
© 2011 Alamo Group Inc.
ASSEMBLY
TAIL WHEEL ASSEMBLY - LIFT TYPE
1. Attach Beam Support Weldments (2) to the Main Frame Assembly with 1/2” x 1-1/2” Bolts (6) &
Locknuts(7).
2. Slide the Beam Weldment (1) through Bracket (3) and attach to the Mower Lugs with 5/8” x 4-1/2” Bolt(4)
and Locknut(5).
3. Install 1/2” x 1-1/2” Bolts (6) through Beam Support Weldment (2) and Bracket (3). (Install through pair of
holes which will give approximate desired cutting height). Install Locknut (7).
The Components of these machines are quite heavy. Block all components up securely
before working under or putting extremities under such parts.
TONGUE - PULL TYPE
Insert tongue lugs between mainframe uprights and retain using Bushings & Special Pins. Insert Retaining Clip
to Special Pins. See Figure Asm-R-0136.