Filter
Top Products
OPERATION
TW120 01/11 Operation Section 4-23
© 2011 Alamo Group Inc.
OPERATION
• Inspect the gearbox oil level. A low oil level is a
warning sign that the gearbox may be cracked
or its seal is damaged and needs replacement.
• Ensure the gearbox vent is in place and free
from clogs. OPS-R-0040_C
• Inspect blades and blade bolts for looseness
and excessive wear. Make sure the mower is
securely blocked up before crawling beneath.
Replace damaged, worn and missing blades as
complete sets to maintain rotary balance during
operation.
• Ensure carrier hub nut is tightened with the
cotter pin inserted and spread.
• Ensure the blade carriers are properly timed to
avoid blade contact during operation. See
instructions to properly time blades in the
Maintenance Section. OPS-R-0041 _B
• Ensure each hydraulic cylinder is installed and
retained correctly. Ensure the proper size pins
are used to retain the cylinders in place and
are secured with pins.
• Check for hydraulic oil leaks on the cylinders,
along the hydraulic lines, and at tractor
hydraulic ports.IMPORTANT: DO NOT use
your hands to check for oil leaks. Use a piece
of heavy paper or cardboard to check for
hydraulic oil leaks. OPS-R-0013_H