Filter
Top Products
CHAPTER 5: Configuration
87
• WTI-Group-Access - Determines which plug group(s) the user will be
allowed to access. The argument for this command includes a character for
each, dened plug group. The rst character in the string is used to represent
the rst plug group dened, and the last character in the string represents the
last plug group dened. The following options are available for each
plug group:
0 = Off (Deny Access)
1 = On (Allow Access)
For example, to allow access to the rst three dened plug groups out of a total
of six dened plug groups, the command line would be:
WTI-Group-Access="111000"
Example:
The following command could be used to set the command access level to "User",
allow access to Serial Ports 1, 3, 5 and 7 and Plugs 1 and 2, and also allow access to
the rst two of ve dened plug groups:
tom Auth-Type:=Local, User-Password=="tom1"
Login-Service=Telnet,
Login-TCP-Port=Telnet,
User-Name="HARRY-tom",
WTI-Super="1",
WTI-Plug-Access="11000000",
WTI-Group-Access="11000",