Filter
Top Products
CHAPTER 5: Configuration
77
• SNMP Contact: (Default = undened.)
• SNMP Location: (Default = undened.)
• Read Only Community: Note that this parameter is not available when the
SNMP Version is set to V3. (Default = Public.)
• Read/Write Community: Note that this parameter is not available when the
SNMP Version is set to V3. (Default = Public.)
5.9.7. SNMP Trap Parameters
These menus are used to select parameters that will be employed when SNMP traps
are sent. For more information on SNMP Traps, please refer to Section 12. Both
the Text Interface and Web Browser Interface allow the following parameters to be
dened:
• SNMP Manager 1: The IP Address for the rst SNMP Manager. For more
information, please refer to Section 12. (Default = Undened.)
Note:
In order to enable the SNMP Trap feature, you must define at least
one SNMP Manager.
• SNMP Manager 2: (Default = Undened.)
• Trap Community: (Default = Public.)