Filter
Top Products
CHAPTER 5: Configuration
69
• Telnet Access: Enables/disables Telnet access. When Telnet Access is "Off,"
users will not be allowed to establish a Telnet connection to the unit.
(Default = On.)
• Telnet Port: Selects the TCP/IP port number that will be used for Telnet
connections. In the Text Interface, this item is dened via a submenu,
displayed when the Telnet Access parameter is selected. (Default = 23.)
• Max. Per Source: The maximum number of Telnet sessions that will be
allowed per user MAC address. (Default = 4.)
Notes:
• In the Text Interface, the "Per Source" parameter is defined via a
submenu of item 21 (Telnet Access) in the Network Parameters
menu.
• After changing the "Max Per Source" parameter, you must log out
of all pre-existing Telnet sessions in order for the new maximum
value to be applied.
• SSH Access: Enables/disables SSH communication. (Default = On.)
• SSH Port: Selects the TCP/IP port number that will be used for SSH
connections. Note that in the Text Interface, this option is dened via a
submenu that is displayed when the SSH Access parameter is selected (item
number 22). (Default = 22.)
• HTTP Access (Web Access): Enables/disables the Web Browser Interface.
When disabled, users will not be allowed to contact the unit via the Web
Browser Interface. (Default = Off.)
• HTTP Port: Selects the TCP/IP port number that will be used for Web Access.
(Default = 80.)
• HTTPS Access: Enables/disables HTTPS communication. For instructions on
setting up SSL encryption, please refer to Section 14. (Default = On.)