Filter
Top Products
Part No. 520166 Form No. F112003A
Use only a qualifi ed mechanic for any
adjustments, disassembly or any kind
of repair .
WARNING: TO AVOID PERSONAL INJURY,
ALWAYS TURN MACHINE OFF, MAKE SURE
ALL MOVING PARTS COME TO A COM-
PLETE STOP.
17
MAINTENANCE
RECONNECT SPARK PLUG WIRE,
AND ALL GUARDS BEFORE STARTING
ENGINE.
DISCONNECT SPARK PLUG WIRE BEFORE
SERVICING UNIT.
Note: Blade, blade brake puck, transaxle brake, and drive belts are normal wear items. These should be
inspected on a regular basis and replaced if worn.
Engine (See Engine Manual)
Check for excessive vibration
Inspect for loose parts
Maintenance Operation
Follow these hourly maintenance
intervals.
Maintenance Schedule
Inspect for worn/damaged parts
Every
Use
Every 50
hrs
Every 5 hrs
or (Daily)
Every 25
hrs
Sharpen Blade
Inspect belts for wear
Replace blade and traction belts
MAINTENANCE HISTORY
Service Performed
Date of Service
Every
200-250 hrs
Lubricate caster pivots and
height adjustment spacers
Lubricate pivot points of all
three control levers
Page 10 of 20
ADJUST ALL BELT TENSIONS AFTER FIRST 5 HRS. OF USE TO PROLONG THE LIFE OF BELTS.
Check brake puck
Check parking brake