Filter
Top Products
Part No 500402 16 F020513A
BC2403 Series Brush Cutter Owner’s Manual
TRANSAXLE DRIVE CLUTCH ADJUSTMENT
READ all safety instructions before servicing unit.
DISCONNECT spark plug wire before servicing unit.
1. Disconnect spark plug wire.
2. As the belt wears or begins slipping or squealing, adjustment may be required to maintain proper cable tension and
clutch engagement. A properly adjusted transaxle drive clutch should require 3 lbs of force to depress the end of the
clutch lever.
3. Adjust cable tension by tightening or loosening cable adjustment barrel on rear of engine base (see below).
Moving the cable adjustment barrel IN decreases clutch tension. Moving the barrel OUT increases
tension.
Transaxle Cable Adjustment
4. Reconnect spark plug wire.
DECREASE
INCREASE