Filter
Top Products
9
1. Begin by removing your
vacuum plate (if you have one)
and skimmer basket from
the deep end skimmer.
2. Slide the hose protector net on
the male end of the hose.
3. Fill the hose with water by
placing the end over a return
jet inlet.
IMPORTANT
Your hose is now free of air. Please ensure that the hose
ends are kept under water while performing the following
steps. This will prevent air from entering your system.
VACUUM
PLATE
SKIMMER
BASKET
INSTALLATION (B)
FOR POOLS WITH TWO SKIMMERS
HOSE
HOSE
PROTECTOR
NET