Filter
Top Products
1. Fill the hose with water by
placing the end over a return
jet inlet.
2. Insert the male end of the hose
into the large end of the 45˚
elbow. Then insert the small
end of the 45˚ elbow into the
universal valve cuff.
3. Insert the universal valve cuff
into the wall vacuum fitting.
The 45˚ elbow should be
angled toward the surface.
UNIVERSAL
VALVE CUFF
MALE END
OF HOSE
45˚ ELBOW
12
IMPORTANT
Your hose is now free of air. Please ensure that the hose
ends are kept under water while performing the following
steps. This will prevent air from entering your system.
INSTALLATION (C)
FOR POOLS WITH WALL VACUUM FITTINGS
IMPORTANT: To help prevent suction
entrapment accidents, wall vacuum
fittings should have a safety vac lock
installed. Contact your builder or
retail pool professional for details.