Filter
Top Products
16
ADJUSTMENTS
COVERAGE
Normally it is undesirable for the return line water flow to affect the natural movement of the G3 hose.
However, the following illustrations show how return line pressure can by used to balance cleaning
coverage or to guide the cleaner away from step areas with "V" shaped corners.
A return line located
anywhere along the
shaded area can be
utilized to elongate
excess hose to
"balance" pool
coverage.
Aim
directional
toward
this area
A return line located
anywhere along the
shaded area can be
utilized to gently
push the hose
allowing the G3 to
free itself from in-
pool obstacles.
Aim
directional
toward
this area
TECHNIQUE
Position the return line directional so that you can only detect water movement on the surface
approximately 8 feet out from the wall, and aim it at the center of the opposite wall.
TOP VIEW
CROSS SECTION