AT&T AT3111-2 Landscape Lighting User Manual


 
Appendix
44
Troubleshooting
Difficulty
hearing
messages
• Press VOLUME to increase speaker volume.
System does
not receive
caller ID when
on a call
• Make sure you subscribe to caller ID with call waiting
features services provided by your local telephone
company. Caller ID features will work only if both you
and the caller are in areas offering caller ID service, and
if both telephone companies use compatible equipment.
Incomplete
messages
• If a caller leaves a very long message, part of it may
be lost when the system disconnects the call after four
minutes.
• If the caller pauses for more than seven seconds, the
system stops recording and disconnects the call.
• If the system’s memory becomes full during a message,
the system stops recording and disconnects the call.
• If the caller's voice is very soft, the system may stop
recording and disconnects the call.
• Disconnect the cordless handset battery, and spare
battery, if applicable.
• Wait a few minutes.
• Connect power to the telephone base.
• Re-install the battery, and place the cordless handset
into the telephone base.
• Wait for the cordless handset to re-establish its
connection with the telephone base. Allow up to one
minute for this to take place.