Filter
Top Products
Telephone operation
9
Programming voicemail navigation keys
This feature allows you to use the VOICEMAIL,
PLAY, SKIP and ERASE buttons to access your
voicemail. Before you begin, be sure to have
your access number and password available to
access your voicemail. You will also need the key
sequence to play, skip and erase your messages.
To program the ACCESS NUMBER button:
1. Press MENU/SELECT from the idle mode.
2. Press CID or to select >VOICEMAIL SETUP,
then press MENU/SELECT.
3. Press MENU/SELECT again to select >ACCESS
NUMBER.
4. Use the dial pad to enter the access number. Press
MUTE/REMOVE to delete characters if necessary.
5. Press MENU/SELECT. You will hear a
confirmation tone.
To program the PASSWORD, PLAY, SKIP and
ERASE buttons, follow the first two steps above.
After you have selected VOICEMAIL SETUP, press
the CID or to highlight the desired item
and then press MENU/SELECT. Follow steps 4 and
5 above to complete the programming of the
desired item.
<VOICEMAIL SETUP
DIRECTORY
<ACCESS NUMBER
PASSWORD
Handset settings
NOTE: Once the
VOICEMAIL button is
pressed, CID ,
and MENU/SELECT
buttons will be disabled
and they will be
replaced by PLAY,
ERASE and SKIP
respectively.