Filter
Top Products
Telephone operation
10
To program a pause:
1. Press MENU/SELECT from the idle mode.
2. Press CID or to select >VOICEMAIL SETUP
then press MENU/SELECT twice.
3. The blinking cursor should be at the end of
your access number. Press and hold the
REDIAL/PAUSE button until a P appears.
4. Press MENU/SELECT. You will hear a
confirmation tone.
To reset all voicemail codes:
1. Press MENU/SELECT from the idle mode.
2. Press CID or to select >VOICEMAIL SETUP
then press MENU/SELECT.
3. Press CID or to select >RESET ALL CODES,
then press MENU/SELECT.
4. The screen displays RESET CODES?
5. Press MENU/SELECT. You will hear a
confirmation tone.
Handset settings
NOTE: A single pause
(approximately three
seconds) is
automatically
programmed between
the access number and
the password when you
program your
VOICEMAIL button so
that your voicemail
service will recognize
your password.
Depending on your
voicemail service, you
may need to program
an extra pause between
the access number and
your password.