Filter
Top Products
TRACTOR OPERATION
DAILY CHECKS TO PERFORM
BEFORE STARTING THE ENGINE
CHECK ENGINE OIL LEVEL
1. Place the machine on a level surface then
remove the oil dipstick.
2. Check the oil level as indicated in the
engine owner’s manual and fill with the rec-
ommended motor oil.(See Figure 5).
CHECK FUEL LEVEL
1. Remove the fuel tank cap (See Figure 6).
2. Fill tank to the bottom of the fuel tank neck.
3. Use minimum of 86 octane gasoline.
4. Wipe any spilled fuel before starting the
engine.
NOTE: Do not overfill the fuel tank.
Observe all safety statements listed in the
safety information section.
CHECK THAT ALL SHIELDS ARE
INSTALLED AND ATTACHING HARD-
WARE IS TIGHT
1. Check the main drive belt shield, A.
2. Check the drive chain cover, B.
3. Check the dust shield, C.
NOTE: Do not operate the machine with
loose or missing shields. Replace missing
shields immediately (See Figure 7).
CHECK TIRE PRESSURES
Check tire pressures in the tractor tires and
inflate to 14 psi.
6
FIGURE 5 Check Engine Oil Level
FIGURE 6 Check Fuel Level
FIGURE 7 Check All Shields