Filter
Top Products
Figure 5c. Series OTC25 P Parameters and Default Settings
Parameter Descriptions
Default Display
This parameter determines whether the OTC25 P’s display
shows the Setpoint or the actual temperature by default.
Regardless of the selection made here, the operator can
observe the other value by momentarily pressing the
Parameter Key. This will cause the alternate value to
be displayed for five seconds.
Display Offset
Display Offset is adjustable from -126 to 126° F (-70 to 70° C).
It can be used to provide limited adjustment of the displayed
temperature as a compensation for offsets between the true
temperature and the temperature seen by the thermocouple.
Low
Fixed Fixed
Calibration
High
Fixed Fixed
Calibration
“J” TC
“K” TC
OTC25 P
Operation
Parameter Range Range Display Options Default Default
°F °C °F °C
Default
Display
Display -126 to -70 to
Offset 126 70
Proportional 1 to 1 to Operator
Band 995 552 Selectable
Rate
0 to
250 sec.
Reset
0 to
999 sec.
Heat Cycle 0 to
Time 120 sec.
Cool Cycle 0 to
Time 120 sec.
Deviation 1 to 1 to Operator
Band Alarm 252 140 Selectable
Output 2
Configuration
Display
Units
Input
Type
8