Filter
Top Products
3
are then custom fitted by hand to the areas underneath the
seats and stairs to provide additional strength to these areas.
This process recognizes that every spa is not identical and
ensures individual inspection and custom fitting of each spa.
The spa shell is then insulated with 2 LB closed cell foam. As
Aruba Spas are made in Canada we know Canadian weath-
er conditions. With this in mind we use enough insulation to
get the maximum obtainable R factor from our insulating
foam. The use of closed cell foam ensures that water cannot
be absorbed into the insulation. The insulation also locks all
supports into place and secures the spa to the spa skirt.
The electronic operating system, which controls the heating,
filtration and lighting systems is then installed and pre-test-
ed in our factory. We have selected a well designed operat-
ing system that is easy to use and features a number of ener-
gy-saving options and safety options such as child lock-out.
The final touch to the spa is the attractive spa skirt with
strong, stable corners and removable side panels fitted into
the frame to allow easy access to all plumbing. The spa skirt
is made from solid tongue-in groove, red cedar and is
designed to use shorter lengths of wood that may otherwise
not have been utilized. We only use wood that has been har-
vested from select-cut forests using environmentally respon-
sible techniques.
GETTING ST
GETTING ST
AR
AR
TED
TED
Your spa comes complete with the following items:
• HTC-4 R12 tapered Grey Spa Cover with locks and Spa
Cover Limited Warranty.
• Digital Pack and Topside Unit
• Aqua Flo Flow-Master Owners Manual
• Aruba Spas Limited Warranty Registration
• Allen Key
Please check to make sure you have received all these items.
In addition, if you have ordered any extra accessories please
check to make sure that they have been included with your
spa.