Filter
Top Products
GB - 10
Install Discharge Chute
Figure 5.
1. Grease discharge chute ring on blower
housing (if not already greased).
2. Remove mounting hardware from auger
housing.
3. Install discharge chute over opening in the
auger housing and secure pedestal to
auger housing with hardware removed in
step 2.
Install Discharge Chute Crank
1. Slide chute crank rod through the opening
in control panel, through the upper hole in
the bracket under panel and out the hole
in the front panel.
2. Align chute crank rod with the universal
joint on chute and fasten with spring clip.
1. Handlebar
Assembly
2. Wing Knobs
3. Wing Nut
4. Speed Selector
5. Bolt
6. Shift Rod
1
2
4
5
6
Figure 4
3
OS3020
2
Figure 5
1. Mounting
Hardware
2. Discharge
Chute
3. Chute Pedestal
1
1
3
2
OS6610
OS6620