Filter
Top Products
GB - 23
SERVICING THE BATTERY
NOTE: Unit comes equipped with a
maintenance-free battery that requires no
regular maintenance except cleaning the
terminals.
NOTE: Unit may be equipped with a U1 style
battery and cover or a sealed glass mat
battery with boot terminal.
U1 Battery Removal and Installation
(Figure 18)
Remove
1. Remove the battery cover.
2. Disconnect negative (–) cable first, then
positive (+) ca ble.
3. Remove battery from unit.
Install
1. Install battery on the unit.
2. Connect positive (+) cable first, then
negative (–) cable.
3. Apply petroleum jelly or dielectric grease
to battery cable ends and terminals.
4. Replace the battery cover.
WARNING: Battery posts,
terminals and related accessories
contain lead and lead
compounds, chemicals known to
the State of California to cause
cancer and reproductive harm.
Wash hands after handling.
1
1. Battery Cover
2. Negative (–)
Cable
3. Negative (–)
Terminal
4. Battery
5. Positive (+)
Terminal
6. Positive (+)
cable
3
4
2
5
6
Figure 18