Filter
Top Products
GB - 10
CARTON CONTENTS
ASSEMBLY
1. Remove all packing materials and straps
from unit.
2. Remove lower pair of nuts and bolts
from the handlebars.
3. Rotate the handlebar into the operating
position.
4. Replace the nuts removed in step 2 and
then tighten.
5. Rotate emission component shelf to
horizontal position. Tighten upper
handlebar bolts.
ASSEMBLY
CAUTION: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
Figure 3
1. Mower Unit
2. Literature Pack with
Installation Hardware
1
2