Filter
Top Products
14
Ordering Information
Models
MG3691A 2 – 8.4 GHz Signal Generator
MG3692A 2 – 20 GHz Signal Generator
MG3693A 2 – 30 GHz Signal Generator
MG3694A 2 – 40 GHz Signal Generator
MG3695A 2 – 50 GHz Signal Generator
MG3696A 2 – 65 GHz Signal Generator
Options and Accessories
MG3690A/1A Rack Mount with slides – Rack mount kit containing a set of track slides (90 degree tilt capability), mounting ears,
and front panel handles to let the instrument be mounted in a standard 19-inch equipment rack.
MG3690A/1B Rack Mount without slides – Modifies rack mounting hardware to install unit in a console that has mounting
shelves. Includes mounting ears and front panel handles.
MG3690A/2X Mechanical Step Attenuator – Adds a 10 dB/step attenuator. Rated RF output power is reduced. (This option
comes in different versions, based on instrument configuration.)
MG3690A/2E Electronic Step Attenuator – Adds a 10 dB/step electronic attenuator with a 120 dB range for the MG3691A.
Rated RF output power is reduced. (Not available with Option 20 or 22.)
MG3690A/3 Ultra Low Phase Noise, main band – Adds new modules to significantly reduce SSB phase noise.
MG3690A/4
10 MHz to 2.2 GHz RF coverage, Ultra-Low Phase Noise version – Uses a digital down converter to significantly
reduce SSB phase noise.
MG3690A/5 10 MHz to 2 GHz RF coverage – Uses an analog down converter.
MG3690A/6 Analog Sweep Capability – (limited to ≥500 MHz when used with Option 4.)
MG3690A/7
IF Up-Conversion – Adds an internal 40 GHz mixer for up-converting an IF signal. (Not available with MG3695A,
MG3696A, or with Options 18 or 20.)
MG3690A/8 Power Monitor – Adds internal power measurement capability. (Not available with Option 9.)
MG3690A/9X Rear Panel Output – Moves the RF output connector to the rear panel. (This option comes in different versions,
based on instrument configuration.) (Not available with Option 8.)
MG3690A/10
User-Defined Modulation Waveform Software – External software package provides the ability to download
user-defined waveforms into the memory of the internal waveform generator, serially or via GPIB. External PC
and an instrument with LF Generator, Option 23, are required.
MG3690A/12 Frequency and Phase Modulation – External, via a rear panel BNC connector. For internal modulation capability,
requires additionally LF Generator, Option 23.
MG3690A/13X Pulse Modulation – External, via a rear panel BNC connector. For internal modulation capability, requires additionally
Pulse Generator, Option 24. (This option comes in different versions, based on instrument configuration.)
MG3690A/14 Amplitude Modulation – External, via a rear panel BNC connector. For internal modulation capability, requires
additionally LF Generator, Option 23.
MG3690A/15X High Power – Adds high-power RF components to the instrument to increase its output power level. (This option
comes in different versions, based on instrument configuration.)
MG3690A/16 High Stability Time Base – Adds an ovenized, 10 MHz crystal oscillator as a high-stability time base.
MG3690A/17 Delete Front Panel – Deletes the front panel for use in remote control applications where a front panel display
and keyboard control are not needed. (Only available with Options 1A or 1B)
MG3690A/18 mmW Bias Output – Adds a rear panel BNC Twinax connector required to bias the 5400-xWRxx millimeter wave
source modules, sold separately. (Not available with Option 7.)
MG3690A/20 Scan Modulation – Adds an internal Scan modulator for simulating high-depth amplitude modulated signals.
Requires an external modulating signal input capability. (Not available on models MG3693A, MG3694A, MG3695A,
MG3696A, or with Options 2E, 7, or 22.)
MG3690A/22 0.1 Hz to 10 MHz Audio coverage – Uses a DDS for coverage down to approximately DC. When adding Option
22, the output power is derated by 2 dB. The frequency resolution below 10 MHz is 0.02 Hz. No modulation is
available in the 0.1 Hz to 10 MHz band. (Not available without Option 4 or 5, or with Option 20 or 2E)
MG3690A/23 LF Generator – Provides modulation waveforms for internal AM, FM, or ΦM. (Not available without Option 12 or 14.)
MG3690A/24 Pulse Generator – Provides pulse waveforms for internal Pulse Modulation. (Not available without Option 13.)
MG3690A/25X Analog Modulation Suite – For ease of ordering and package pricing, this option bundles Options 12, 13, 14, 23
and 24, offering internal and external AM, FM, ΦM, and Pulse Modulation. (This option comes in different versions,
based on instrument configuration.)