Filter
Top Products
ASSEMBLY
GR60/72 02/07 Assembly Section 3-7
© 2007 Alamo Group Inc.
ASSEMBLY
Front Chainguards (Optional Equipment)
Chainguards
Front and Rear Chain Guards (Optional Equipment) are recommended for higher than normal usage (100
hours or more per year) and will provide protection from thrown objects with careful operation. Chain Guards
must be maintained in good repair by replacing missing or worn sections or by replacing completely when worn
or damaged.
Front Chain Guard (Figure Asm-0006)
1. Attach Chainguard Plate (1) to deck using 5/8"
x 3-1/2" Bolts (4), Washers (5), and Locknut (6).
2. Insert the individual Chain Links (2) into slotted
holes in Chain Guard Plate (1) and secure in
place with Rod (3) (Complete Chainguard
Assemblies are available. See Parts Section in
this book.)
Rear Chain Guards (Optional Equipment)
Rear Chain Guard (Figure Asm-0007)
1. Attach both Deflectors (1 & 2) to deck using 1/
2" x 1-1/4" Bolts (4) and Locknuts (5). In center
of deck use Bolt (7) and Locknut (5) to tie both
Deflectors (1 & 2) together.
2. Secure Chainguard Assembly (3) to Deflectors
(1 & 2) using 1/2" x 1-1/4" Bolts (4),
Flatwashers (6), and Locknuts (5).
3. Fasten Rear Plate (8) on both ends of
Deflectors (1 & 2) using 1/2" x 1-1/4" Bolts (4)
and Locknuts (5).