Filter
Top Products
MAINTENANCE
A96B 03/06 Maintenance Section 5-16
© 2006 Alamo Group Inc.
MAINTENANCE
Step VIII.
Check backlash between gear set. Backlash should be.012 to.024 inches. If backlash is to small add shims
between main housing and input hub. Remove shims for excessive backlash.
Step IV.
Remove side caps one at a time, seal with sealer and reinstall. Repeat process for input hub assembly.
Gearbox is ready to be filled with good grade of NLGI 000 Grease. See maintenance section for specifications.
ITEM QUANTITY DESCRIPTION
1. 2 Seal
2. 2 Cap-Side
3. 1 Gear-14 Tooth
4. 1 Spacer
5. 2 Pipe Plug
6. 1 Shaft
7. 1 Housing
8. 4 Bearing
9. 24 Lock washer
10. 24 Bolt
11. AR Gaskets
(Includes 0.40,
0.25, & 0.30)
12. 1 Cap-Hub Input
13. 1 Adjusting Nut
14. 1 Cotter Pin
15. 1 Seal
16. 1 Shaft
17. 1 Gear - 17 Tooth
18. 1 Pipe Plug Vented
(not illustrated)