Filter
Top Products
ASSEMBLY
4211-4211SS MSL 01/11 Assembly Section 3-9
© 2011 Alamo Group Inc.
ASSEMBLY
Installing Quick Attach Device
Always use a drift and hammer made of non-sparking material (a shot-filled mallet is
recommended) to install or remove pins. A steel hammer or drift could generate flying metal
fragments and result in injury. Always wear safety glasses when using a hammer to remove
or install pins.
1. Fasten quick attach device to lower boom arms and bucket tilt cylinders using 1” x 4-3/8” anti-rotation pins,
3/8” x 3/4” shoulder bolts, and 3/8” lock nuts (supplied with loader). Image Asm-L-0014_B.
2. Attach bucket leveling rod indicator (supplied with loader), to outside of right ear on quick attach as shown.
Image Asm-L-0014_B. Secure bucket leveling rod indicator with two 1/8” x 1” cotter pins (supplied with
loader).