Agri-Fab 45-0456 Lawn Sweeper User Manual


  Open as PDF
of 24
 
5
FIGURE 8
FIGURE 6
FIGURE 9
FIGURE 7
Attach the hitch bracket (12) and straight hitch bracket 7.
(13) to the drawbar using two 5/16" x 2-1/2" hex bolts
(15)and5/16"nylocknuts(21).Seegure6.
Assemble a 3/8" x 3" hitch pin (35) and two 3/4" 8.
spacers (22) to the hitch brackets. Secure them in
placewitha3/32"haircotterpin(18).Seegure6.
Slide ends of two lower hopper tubes (10) into the 9.
apsatthefrontofthehopperbag(3)asshownin
gure7.
Slide a rear hopper tube (11) onto ends of lower 10.
hopper tubes (10) making sure the holes in the rear
hoppertubearefacingupasshowningure8.
Secure the rear hopper tube (11) to the lower hopper 11.
tubes (10) with two 1/4" x 1" curved head bolts (26)
and1/4"nylocknuts(24).Seegure8.
NOTE: Hopper bag (3) not shown for clarity.
Slidetheupperhoppertubes(6)throughapsinthe12.
sidesofthehopperbag(3)asshowningure9.
Slide the upper hopper tubes (6) up inside the hopper 13.
bag(3)asshowningure9.
21
3
6
3
10
13
12
15
35
22
18
24
24
11
10
10
26
26
 previous next