Filter
Top Products
3-13
Using the Infiniium DCA
Using the Quick Measure Feature
Using the Quick Measure Feature
Press Quick Measure and the Infiniium DCA automatically performs four
measurements on a displayed signal. You can configure Quick Measure to
include any four measurements located on the measurement tool bar. Quick
Measure has a default set of measurements for each instrument mode. For
example, in Oscilloscope mode the default measurements are: rise time, fall
time, period, and V amplitude. In Eye/Mask mode you can also configure
Quick Measure to perform a mask test.
To configure Quick Measure
• On the Measure menu, choose Quick Measure Config.