Filter
Top Products
28 Agilent 6000 Series Oscilloscopes Programmer’s Quick Start Guide
2 Getting Started
Other Ways of Sending Commands
Standard Commands for Programmable Instrumentation (SCPI) can be sent
via a Telnet socket or through the Browser Web Control.
Telnet S ockets
The following information is provided for those programmers who wish to
control the oscilloscope with SCPI commands in a Telnet session.
To connect to the oscilloscope via a telnet socket, issue the following
command:
telnet <hostname> 5024
where <hostname> is the hostname of the oscilloscope.
This will give you a command line with prompt.
For a command line without a prompt:
Use port 5025.
Example:
telnet <hostname> 5025
Sending SCPI Commands using Browser Web Control
To send SCPI commands using the Browser Web Control feature, establish a
connection to the oscilloscope via LAN as described in the 6000 Series
Oscilloscopes User’s Guide. When you make the connection to the oscilloscope
via LAN and the instrument’s welcome page is displayed, select the Browser
Web Control tab, then select the Remote Programming link.