Filter
Top Products
Command
:MEASURE:TEDge[?] <meas_thres_txt>,
<slope><occurrence>[,<source>]
Measures the time interval between the trigger event and the specified
threshold level and transition.
<meas_thres_
txt>
{UPPer | MIDDle | LOWer}
<slope>
{- (minus) for falling | + (plus) (optional) for rising}
<occurrence>
Numeric value representing which edge of the occurrence should be used for
the measurement.
<source>
{CHANnel<number> | FUNCtion<number> |
RESPonse<number> | WMEMory<number>}
<number>
For channels: an integer, 1 through 4, indicating the slot in which the channel
resides, followed by an optional A or B identifying which of two possible
channels in the slot is being referenced. For functions: 1 or 2. For waveform
memories (WMEMory): 1, 2, 3, or 4. For TDR responses: 1, 2, 3, or 4.
Command
:MEASure:TMAX[?] [<source>]
Measures the first time at which the maximum voltage of the source
waveform occurred. When FFT is the specified source, the frequency at
which the first maximum value occurred is measured.
<source>
{CHANnel<number> | FUNCtion<number> |
RESPonse<number> | WMEMory<number> | FFT}
<number>
For channels: an integer, 1 through 4, indicating the slot in which the channel
resides, followed by an optional A or B identifying which of two possible
channels in the slot is being referenced. For functions: 1 or 2. For waveform
memories (WMEMory): 1, 2, 3, or 4. For TDR responses: 1, 2, 3, or 4.
Measure Commands
30