Agilent Technologies 54622A Sprinkler User Manual


 
1-7
General Information
Table 1-2
Accessories available
Model Description
01650-61607 16:16 logic cable and terminator (for use with 54621D/22D)
54620-68701 16:2 x 8 logic input probe assembly (shipped standard with 54621D/22D)
1146A 100 kHz current probe, ac/dc
1183A Testmobile scope cart
1185A Carrying case
1186A Rackmount kit
10070C 1:1 passive probe with ID
10072A Fine-pitch probe kit
10073C 10:1 500 MHz probe with ID
10075A 0.5 mm IC clip kit
10076A 100:1, 4 kV 250 MHz probe with ID
10100C 50
termination
10833A GPIB cable, 1 m long
34398A RS-232 cable (standard with 100 MHz models)
E2613B 0.5 mm Wedge probe adapter, 3-signal, qty 2
E2614A 0.5 mm Wedge probe adapter, 8-signal, qty 1
E2615B 0.65 mm Wedge probe adapter, 3-signal, qty 2
E2616A 0.65 mm Wedge probe adapter, 8-signal, qty 1
E2643A 0.5 mm Wedge probe adapter, 16-signal, qty 1
E2644A 0.65 mm Wedge probe adapter, 16-signal, qty 1
N2726A Accessory pouch and front-panel cover (standard with 100 MHz models)
N2727A Thermal printer and pouch
N2728A 10 rolls of thermal printer paper
N2757A GPIB Interface Module
N2758A CAN Trigger Module
N2771A 1000:1, 15 kV, 50 MHz high voltage probe
N2772A 20 MHz differential probe
N2773A Differential probe power supply
N2774A 50 MHz current probe, ac/dc
N2775A Power supply for N2774A
service.book Page 7 Wednesday, December 18, 2002 8:35 AM