Filter
Top Products
9
Programmable Weather Alarms
Each Selectable Weather Category features an alarm option. When an alarm
sounds,thedisplayunitemitsaudiblebeepingandashestheaffectedcategory,
its alarm settings, and any other relevant data.
Some alarms can be customized to alert you when your programmed value is
reached. Alarms include:
The rain alarm does not require a preset numerical value, but instead sounds
as soon as rain is recorded. Similarly, the storm alarm sounds when a large
atmospheric pressure drop occurs, which usually indicates an oncoming storm.
Note: The storm alarm is NOT intended to be a safety device or warning system.
Set a Weather Alarm
1. Choose the weather category for which you wish to set an alarm by pressing the
“▲” or “▼” buttons until the category is displayed on the
Selectable Category part of the display unit.
2. To program a value (only applies to alarms that require a
value), press AND HOLD the “ ” button
underneath the alarm you wish to set until the “ ”
indicatorappearsandthealarmsettingashes.
3. Adjust the alarm
value by pressing
the “▲” or “▼”
buttons.
4. Press the “ ”
buttontoconrmvalue.
5. Next, press the “ ” button to activate the alarm (the X indicator disappears
when alarm is activated).
Alarm is now programmed and turned on.
Silence a Sounding Alarm
The alarm sounds initially for a few minutes, then silences itself. The alarm then
sounds every few minutes afterwards until one of the following happens:
1. “SNOOZE” - Press any button. Alarm silences, but sounds again if the alarm
condition reoccurs.
2. Turn alarm “OFF” - Deactivates alarm.
WIND CHILL LOW
DEW POINT LOW HIGH
HEAT INDEX HIGH
RAIN HIGH
WIND SPEED HIGH
OUTDOOR HUMIDITY LOW HIGH
OUTDOOR TEMP LOW HIGH
STORM ALARM HIGH
INDOOR HUMIDITY LOW HIGH
INDOOR TEMP LOW HIGH