Filter
Top Products
6
Select Measurement Units
To select between standard units (mph, ºF, etc.) or metric
units (kph, ºC, etc.):
1. Press the “
▲
” or “
▼
” buttons until “SET UNITS?” is
displayed on the Selectable Category part of the display unit.
2. Press the “SET” button to set the unit preference.
3. Press the “
▲
” or “
▼
” buttons to select “STAND” for
standard or “METRIC” for metric units.
4.Pressthe“SET”buttontoconrmyourselection.
5. Next, you will see “WIND MPH”. Press the “
▲
” or
“
▼
” buttons to select MPH, KPH, or KNOTS for wind
speed units.
6.Pressthe“SET”buttontoconrmyourselection.
Units are now set.
Placement for Maximum Accuracy
Display Unit Placement
Place the display unit in a dry area free of dirt and dust. To ensure
accurate temperature measurement, place out of direct sunlight and
away from heat sources or vents. Display unit stands upright for
tabletop use or is wall-mountable.
Important Placement Guidelines
Display unit and sensor must be within 330 feet (100 m) of each other.
MAXIMIZE WIRELESS RANGE
Place units away from large metallic items, thick walls, metal surfaces, or other
objects that may limit wireless communication.
PREVENT WIRELESS INTERFERENCE
Place both units at least 3 feet (.9 m) away from electronic devices (TV,
computer, microwave, radio, etc.).
Using the Professional Weather Center
Learning Mode
Self-Calibrating Forecasting use a unique algorithm to analyze changes in
pressure over a time period (called Learning Mode) to determine your altitude.
After 14 days, the Learning Mode icon disappears from the display screen. At
this point, the self-calibrated pressure is tuned in to your location and the unit is
ready for superior weather prediction.
OPERATION