Filter
Top Products
10
Care & Maintenance
Display Unit Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away
from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air.
Specications
TEMPERATURE RANGE
Indoor: 32ºF to 122ºF; 0ºC to 50ºC
HUMIDITY RANGE
Indoor: 16% to 98%
WIND SPEED
0 to 99 mph; 0 to 159 kph
WIND DIRECTION
INDICATORS
16 points
RAINFALL
0 to 99.99 in; 0 to 9999 mm
WIRELESS RANGE
330ft / 100m depending on home construction materials
OPERATING FREQUENCY
433 MHz
POWER
Display: 4.5vdc power adapter
6 x AA alkaline batteries (optional)
DATA REPORTING
Wind Speed: 18 second updates; Direction: 30 second updates
Outdoor temperature & humidity: 36 second updates
Indoor temperature & humidity: 60 second updates
Calibration
Calibrate Temperature & Humidity
The indoor / outdoor temperature and humidity readings can be calibrated on the
display unit to improve accuracy. Calibration improves accuracy when 5-in-1 sensor
placement or environmental factors impact your data accuracy.
1. Choose the weather category you wish to calibrate by pressing the
“
▲
” or “
▼
”
buttons until the category is displayed on the Selectable Category part of the
display unit.
2. Press AND HOLD the
“
▲
” and “
▼
” buttons and the “SET” button all at the
same time for 15-20 seconds.
• The display unit beeps, and all display data is hidden except for the value
being calibrated.
• “
” (calibrate) and arrows appear next to the value being calibrated.
3. Press the
“
▲
” or “
▼
” buttons to calibrate the data value higher or lower from the
actual reading.
4. Press the
“SET”buttontoconrmthecalibrationadjustment.Note:
The “
” icon remains illuminated next to calibrated values.