103FT-857 Operating Manual
MENU MODE No•038
[
DIG MODE
]
Function: Selects the mode and sideband (if applicable) in the DIG (Digital) mode.
Available Values: RTTY-L/RTTY-U/PSK31-L/PSK31-U/USER-L/USER-U
Default: RTTY-L
RTTY-L: AFSK RTTY operation on the LSB mode
RTTY-U: AFSK RTTY operation on the USB mode
PSK31-L: PSK-31 operation on the LSB mode
PSK31-U:PSK-31 operation on the USB mode
USER-L: User-programmed custom operation based on LSB mode
USER-U: User-programmed custom operation based on USB mode
In the USER-L and USER-U modes, you can define the display frequency offset and carrier
frequency offset by Menu Mode No-036
[
DIG DISP
]
and No-039
[
DIG SHIFT
]
.
MENU MODE No•039
[
DIG SHIFT
]
Function: Defines the carrier frequency offset during DIG (USER-L or USER-U) mode
operation.
Available Values: –3000 ~ +3000 Hz
Default: 0 Hz
MENU MODE No•040
[
DIG VOX
]
Function: Sets the gain of the VOX circuitry’s input level for the DIG mode.
Available Values: 0 ~ 100
Default: 0
Note: When you wish to use “DIG VOX,” press the
[
FUNC
]
key momentarily, then rotate
the SELECT knob, until you reach Multi Function Row “d”
[
RPT, REV, VOX
]
, then press
the
[
C
](
VOX
)
key. The “u” icon and “ ” icon will disappear, signifying that the (SSB/AM/
FM voice) VOX system has been turned off. Despite these indicators having disappeared,
the Digital Mode “VOX” system will still be active, allowing audio input from a TNC or
sound card to engage the transmitter.
MENU MODE No-041
[
DISP COLOR
]
Function: Selects the illumination color for each operating status.
Available Values: ARTS/BAND/FIX/MEMGRP/MODE/MTR/VFO
Default: FIX: 26
MENU MODE No-042
[
DISP CONTRAST
]
Function: Setting of the display contrast level.
Available Values: 1 ~ 13
Default: 5
MENU OPERATION
