99FT-857 Operating Manual
MENU MODE No•012
[
BEACON TIME
]
Function: Selects the interval time (between message and message).
Available Values: OFF/1 sec ~ 255 sec
Default: OFF
MENU MODE No•013
[
BEEP TONE
]
Function: Selects the beep frequency.
Available Values: 440/880/1760 Hz
Default: 880 Hz
MENU MODE No-014
[
BEEP VOL
]
Function: Selects the beep volume level.
Available Values: 0 ~ 100
Default: 50
Press the
[
B
]
key to monitor the level during adjustment.
MENU MODE No•015
[
CAR LSB R
]
Function: Sets the Rx Carrier Point for LSB.
Available Values: –300 ~ +300 Hz
Default: 0 Hz
MENU MODE No•016
[
CAR LSB T
]
Function: Sets the Tx Carrier Point for LSB
Available Values: –300 ~ +300 Hz
Default: 0 Hz
MENU MODE No•017
[
CAR USB R
]
Function: Sets the Rx Carrier Point for USB
Available Values: –300 ~ +300 Hz
Default: 0 Hz
MENU MODE No•018
[
CAR USB T
]
Function: Sets the Tx Carrier Point for USB
Available Values: –300 ~ +300 Hz
Default: 0 Hz
MENU MODE No•019
[
CAT RATE
]
Function: Sets the transceiver’s circuitry for the CAT baud rate to be used.
Available Values: 4800bps/9600bps/38400bps
Default: 4800bps
MENU MODE No•020
[
CAT/LIN/TUN
]
Function: Selects the device which is connected to the CAT/LINEAR jack on the rear panel.
Available Values: CAT/LINEAR/TUNER
Default: CAT
MENU OPERATION
