Broadband VPN Gateway User Guide
Figure 32: Static Routing Screen
Data - Static Routing Screen
RIP
RIP Version
Select the desired option from the drop-down list.
Static Routing
Static Routing
Table Entries
This list shows all entries in the Routing Table.
• The "Properties" area shows details of the selected item in the
list.
• Change any the properties as required, then click the "Update
Route" button to save the changes to the selected entry.
Properties
• Destination Network - The network address of the remote LAN
segment. For standard class "C" LANs, the network address is
the first 3 fields of the Destination IP Address. The 4th (last)
field can be left at 0.
• Subnet Mask - The Subnet Mask for the remote LAN segment.
For class "C" networks, the default mask is 255.255.255.0
• Gateway IP Address - The IP Address of the Gateway or
Router which the Broadband VPN Gateway must use to com-
municate with the destination above. (NOT the router attached to
the remote segment.)
• Port - Normally, this will be "LAN". If NAT is disabled, the
"WAN" option can be used for Routers which are accessed via
the WAN port.
• Metric - The number of "hops" (routers) to pass through to
reach the remote LAN segment. The shortest path will be used.
The default value is 1.
50
