Sanyo PLC-WXE45 Manual

A SERVICE OF

next previous

52

CAUTION:

WHEN YOU HAVE CHANGED THE PIN CODE, WRITE

DOWN THE NEW PIN CODE AND KEEP IT SECURELY.

IF YOU FORGET YOUR PIN CODE, SOME SETTINGS

OF THE ALARM FUNCTION CAN NO LONGER BE

CHANGED.

Chan�e the PIN code

Pressthe Fbutton andenter thefour-digitPIN code

withinabout10seconds.TheALARMindicatorblinks

red for afew seconds and high-pitchedconfirmation

soundismade.

Settin�s

Reset the settin�s

Select Factory defaultin the Settingmenu to reset the

settingsfortheAntitheftalarmfunction.

Side Control

1

2

Whiletheindicatorisblinking,enternewPINcodethen

youwillhearthehigh-pitchedconfirmationsoundand

theALARMindicatorisoff.

WhentypinganincorrectPINcode,youwillhearlow-

pitched sound.  If you enter incorrect PIN codes 3

times,thealarmstartsringing.

A PIN code for Antitheft alarm function is the

combination of 1, 2, or 3. Enter the PIN code with

thebutton1,2,and3.ThedefaultPINcodeissetas

"1111".



Note:

• This is effective only when the Antitheft alarm setting is

released.

• You can make some more detailed settings. (p. 48)

ALARM

indicator

F button

button 1, 2, 3

Antitheft Alarm Function