PROG. LIST
D
ue to many reasons, such as poor
cable reception, the picture can
sometimes appear slightly “speckled”
(an indication of signal noise in the
picture). The DNR (Dynamic Noise
Reduction) control can help eliminate
this type of interference and improve
the quality of the picture.
Press the MENU button on the
remote to show the onscreen menu.
PICTURE will be highlighted.
Press the CURSOR RING
RIGHT and the menu will shift to the
left. BRIGHTNESS will be highlight-
ed.
Press the CURSOR RING
DOWN repeatedly until the DNR
control is highlighted.
Press the CURSOR RING
RIGHT to switch DNR ON or press
the CURSOR RING LEFT to switch
DNR OFF.
Press the STATUS/EXIT button
to remove the menu from the screen.
TURNING ON THE DYNAMIC NOISE REDUCTION CONTROL
PROG. LIST
I
mageMax™ helps you sharpen the
picture quality by making dark por-
tions of the picture darker and light
portions of the picture brighter. Follow
these steps to turn ImageMax™ ON.
Press the MENU button on the
remote control to show the onscreen
menu. PICTURE will be highlighted.
Press the CURSOR RING
RIGHT and the menu will shift to the
left. BRIGHTNESS will be highlight-
ed.
Press the CURSOR RING
DOWN repeatedly until the IMAGE-
MAX control is highlighted.
Press the CURSOR RING
RIGHT to switch between ON and
OFF.
Press the STATUS/EXIT button
to remove the menu from the screen.
TURNING ON THE IMAGEMAX™CONTROL
