PROG. LIST
Y
our television comes with an on-
screen clock. During normal oper-
ation, the clock appears on the screen
when the STATUS/EXIT button is
pressed or if the TIMER DISPLAY
control is turned ON.
Press the MENU button on the
remote control to show the onscreen
menu.
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
Press the CURSOR RING
RIGHT and the menu will shift to
the left. TIMER will be highlighted.
With TIMER selected, press the
CURSOR RING RIGHT again to
shift the display left and highlight the
TIME control.
Press the CURSOR RING
RIGHT again to highlight the time
indicator area.
Press the CURSOR RING
LEFT or CURSOR RING RIGHT
to select the position or digit you wish
to enter.
Press the CURSOR RING UP or
CURSOR RING DOWN to select
the digits for the time. Or press the
NUMBERED buttons to enter the
correct time.
Press the CURSOR RING
RIGHT to move to the AM or PM
position.
Press the CURSOR RING UP or
DOWN to set AM or PM.
Press the STATUS/EXIT button
to remove the menu from the screen.
THE TIMER – SETTING THE CLOCK
SMART HELP
Remember, be sure to press
0 first and then the hour num-
ber for single-digit entries.
The Clock can also be set using the
Guide Plus+
®
download. Please refer
to the Guide Plus+
®
User;s Guide for
more details and instructions.
The TV’s clock settings may be lost
when the TV is unplugged (or when
AC power to the set is interrupted).
