PROG. LIST
AUTOLOCK™– BLOCKING CHANNELS
NOTE: You also can block out the use of the A/V external inputs on the rear of the TV. This stops the viewing of VCR, DVD, and other sources that can be
shown through the A/V input jacks. Select AV1, AV2, or AV3 and then select BLOCK.
A
fter your personal access code
has been set (see the previous
page), you are ready to select the
channels or inputs you want to
block out or censor.
Press the MENU button on
the remote control to show the
onscreen menu.
Press the CURSOR RING
DOWN twice to highlight FEA-
TURES.
Press the CURSOR RING
RIGHT and the menu will shift to
the left. Then press the CURSOR
RING DOWN once to highlight
the AutoLock™ control.
Press the CURSOR RING
RIGHT again to highlight
ACCESS CODE.
Enter your four-digit
ACCESS CODE. CORRECT will
flash very briefly and the menu will
move to the left with BLOCK
CHANNEL highlighted.
Press the CURSOR RING
RIGHT to highlight the TV’s
available channels.
Press the CURSOR RING UP
or CURSOR RING DOWN to
highlight the channel you want to
block.
Press the CURSOR RING
RIGHT to block the channel. A
padlock image appears to the right
of the channel number.
Repeat steps 7 and 8 for any chan-
nels you want to block from view-
ing.
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
NOTE: Blocked
channels will be
skipped when you
press the Channel
+/– buttons. To
view a blocked
channel, refer to
page 29 for details.
If a channel is blocked by the
BLOCK CHANNEL option, the
TV will display the screen shown
to the right. To watch the channel,
enter your access code or change
the BLOCK CHANNEL option
back to off.
